Waterproof Acrylic Spray Paint Fast Dry Metallic And Wood Aerosol
Product Spray Paint
Art No. B1401
Product name: Scratch Resistant Wood Furniture Spray Paint
1. This product is made from acrylic resin. For interior/ exterior
use where a mid
to low gloss sealer is required.
2. Provides UV protection and is water repellent.
3.Can be used with Matt Lacquer Primer.
4. Ideal for use on wooden gates, fences, guard rails etc.
5. Suitable for all wood types.
6. Not recommended for decking.
1. Fast drying
2. Easy operation
3. Interior use
4. Exterior use
5. NO CFCs
|ART NO.||CONTENT||CAN MATERIALS||CAN SIZE||CARTON SIZE||PACKING||20’GP|
Shelf Life: 2 years
Storage Condition: KEEP IT OUT OF REACH OF CHILDREN; Store it in cool, dry and
well-ventilated place lower than 45 degrees; Keep away from fire
source; Do not puncture or burn the bottle.
1.Clean the surface thoroughly, removing dirt, grease, oil, wax,
rust, moisture, etc. Do not spray over loose paint
2.Shake can thoroughly for at least 1-2 minutes until the agitator
begins to move freely.
3.Hold the can 15-25 cm from the surface to be sprayed. Start and
finish spraying off the edge of the surface. To obtain a smooth
finish, spray 2 or more thin coats in a steady side to side motion,
preferable 1 0 minutes interval between each coat.
4.Paint coats are dry to touch in approximately 20 minutes. Allow
more drying time at cooler temperatures.
5.Avoid spraying in rainy day or freezing environment.
6.Store in a cool dry place.
After spraying, clean the valve by turning the can upside down and
pushing the spray head for approximately 4 seconds. If the valve
clogs, pull out the spray head and rinse it in a solvent such as
Free samples are available; we can customize special samples for
Questions and answers:
Q:What is the MOQ?(Minimum order quantity)
A:Our own brand and package has no MOQ,Private brand and design are
30000pcs for each item which depend on the can size you choose.
Q:Can you make our own brand and design,is there any extra charge?
A:yes,OEM and ODM is available.We can make customer's own brand and
design which you have made in CDR or Al or PDF format.or you can
tell us your ideal ,then our designer will figure it out
Q:Is it possible to get free samples,and how can we get it?
A:Yes,We can offer free samples within 5pcs,and it will be sent
though special agent in special way for those are dangerous
products.and no courier will accept them normally.
New customer will need to pay for the courier fees ,and sample will
be sent by DHL or EMS or TNT, It takes 5-7 working days or so.
Q:,How about the production time?
A:It will take 20-25 days after deposit received and all designs
Q:What is your payment terms?
A:Payment terms are as below:
1,T/T30% deposit ,balance should be paid before shipment
2,T/T,30% deposit ,70%by L/C at sight